原理图导网表问题

PADS_ALLEGRO

导网表时的错误提示，请问这种情况该如何解决？
#194 ERROR(ORCAP-36001): Conflicting values of Source Part names found on R38(R_2) and R1(R_1) for part "R".
#195 ERROR(ORCAP-36001): Conflicting values of Source Part names found on R386(R_0) and R1(R_1) for part "R".
8 O6 `0 c- y: V#196 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on R387 and R1 for part "R".
5 Z; @5 R- _$ z  u7 X' G              VALUE
4 B2 L/ R( }0 a/ ?5 a8 F5 P" E% Y#197 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on R388 and R1 for part "R".
9 |1 T6 E6 ~% K4 X" D              PCB Footprint
              VALUE
#198 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on R403 and R1 for part "R".
3 d5 Y0 L$ C4 U: C              VALUE
#199 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on R48 and R1 for part "R".
1 L. m4 V  ?2 ^. O              VALUE
#200 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on R5 and R1 for part "R".

! G+ h" @  \( G1 QPCB Footprint
              VALUE
#201 ERROR(ORCAP-36003): Conflicting values of following Component Definition properties found on R51 and R1 for part "R".
) {4 H$ N- i, J* {2 Y. Q0 i              PCB Footprint
              VALUE
9 ~5 {. y. ]4 w1 {2 C
我在网上看到有人说去掉device属性是可以的，但是我删除不掉device这一栏，我是下图的操作，操作完后device属性值变成了CP、R等等


) ?3 L: O' T+ w+ h

PADS_ALLEGRO

自己解决

GSO_library

REFDES重复了 改下就好了

LUlu619996

PADS_ALLEGRO 发表于 2016-7-14 19:00
# G5 S. |# W% b6 q自己解决

9 N% |2 B8 V# O6 f2 B$ J目前遇到了，請問如何解決??幫個忙呀~~~感謝