怎么把spb16.5 Allegro Design Entry的start Page禁止掉？

net3 · 发表于 2011-6-1 11:23

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

怎么把spb16.5 allegro Design Entry的start Page禁止掉？每次打开都主动联网。很烦

freeboyxd · 发表于 2011-11-25 21:17

本帖最后由 freeboyxd 于 2011-11-25 21:28 编辑

To disable the "Start Page" when starting Capture, see the following steps.
1. Open any design in Capture.
2. From the Menu bar, select "Accessories \ Cadence Tcl/Tk Utilities \ Utilities".
3. In the "Tcl/Tk Applications Dashboard", select "Extended Preferences" and press the Launch button.
4. In the column 'Settings', uncheck "Load web page on startup" and then the 'OK' button a the bottom.

skymxh · 发表于 2011-11-26 23:48

:P:P:P:P

suiwinder · 发表于 2011-11-27 16:50

very good
thanks a lot

sunjy2008 · 发表于 2011-12-9 09:25

呵呵，还有这种方法啊，谢谢

shg_zhou · 发表于 2012-1-28 19:37

Invoke Capture.

1. Go to View > Toolbar and check the "Command Window" (If it is not checked)
2. Type the following command in Command Window and press ENTER

SetOptionBool EnableStartPage 0

3. Close the Capture and reopen. Now, the startup page would not come

ice-river · 发表于 2012-3-9 16:08

很好！！！！

aguang963_0 · 发表于 2012-5-21 17:34

非常经典哈哈，感谢分享

帐号		自动登录	找回密码
密码			注册

怎么把spb16.5 Allegro Design Entry的start Page禁止掉？

EDA365欢迎您登录！

评分

浏览过的版块

推荐内容 /1